Best Techniques to Tackle Linksys Velop Red Light Issue

In today’s technological world, many people rely on the Linksys Wi-Fi mesh to get high-speed internet access in their homes. Linksys Velop provides fast, reliable service to users, but some people are experiencing Linksys Velop red light issues. This guide will help you get rid of the red light on your Linksys Velop router. Don’t miss the important tips and tricks that we will share in this article.

Well, before we discuss the solutions for the red light issue on Velop, we want to share some of the reasons why this might be occurring. This will help you understand the problem better and make it easier to fix.

Linksys Velop Red Light Issue [Reasons]

The following points will aware you of the reasons for the red light on Velop:

  • Inadequate power supply to Velop

  • The insecure connection between Velop and the modem

  • No internet connection

  • Nodes are not in the range

  • No internet network from the ISP end

  • Firmware not updated.

Hence, these are the common reason behind the red light on Velop. But, you don’t need to worry about anything because we have super troubleshooting techniques that assist you to solve this inaccuracy in less time. You just need to read the next section properly. You can also build your own eCommerce app at affordable rates to sell electric items.

Linksys Velop Red Light Issue (Tackle Techniques)

To tackle the red light issue on Velop you need to follow and read all the steps properly without skip any one.

Check the Power Connections

Firstly, you need to check the electric socket to which your Linksys device is connected is working and give the proper power supply to your device. If you found any problem in the socket like a short circuit and damaged wire. So, we can recommend you change the wall outlet as soon as you can to give the proper supply to the Velop and remove the red light from your router.

Restart your Velop

Rebooting the Linksys Velop is the best and easy way to get rid of the red light issue because by restarting the Velop, you can easily able to fix that problem. The process of restarting the Linksys Velop mentioned below.

  • First, turn off your Linksys Velop by unplugging it from the power socket.

  • Secondly, wait for some minutes to give the recovery time to Velop.

  • Finally, put the power cable into the power socket and turn the device on.

Does the Linksys Velop red light issue solve after the restart? If not, doesn’t panic we have another solution with the help of assistance you fix that issue. Keep reading and continue!

Update the Firmware

You can also try to update the firmware by using the Linksys Velop app to solve the Linksys Velop red light issue.

The following steps will help you to keep your firmware updated via the application:

  • Firstly, you need to take your mobile phone and then unlock it.

  • Open the Google play store on your smart phone and search the Linksys Velop app.

  • Once you search you can see the results on your display.

  • Select the Linksys Velop app and put it on download.

  • Thereafter, install the application properly on your smartphone, and launch it for the further process.

  • After that you need to fill in the credentials in the application, and then click the Login button.

  • You can see the Linksys velop dashboard on the screen, where you need to tap on the main menu, to get the firmware update option.

Therefore, by performing these steps you easily keep your firmware updated via application. If you do not wish to use the application then you can update your firmware by accessing the Linksys Velop login page manually.

Close the WiFi Devices

If you are still facing the red light issue, it might be due to far distance between your devices. The host modem and Linksys Velop must be next to one another. The use of an Ethernet cable is the best way to give a strong connection to the devices.

Talk With Internet Service Provider

Again experiencing the Linksys Velop red light issue? Then it may be a chance that your internet network is slow from the end of the Internet Service Provider. So, to tackle this issue contact your ISP and confirm the network signals, if you found any fault then solve that as possible as you can.


Hope you like the post-related to red light on Linksys Velop and are easily able to fix this by following the above-mentioned steps properly. Apart from it, you can drop a comment regarding the post for your fellow readers.

Leave a Comment